Design of FM Transmitter and Receiver Operating in the Range of 88 MHz To 108 MHz

Authors

  • Ugyen Dema Electronics and Communication Engineering Department, College of Science and Technology, Royal University of Bhutan Author
  • Simon Gurung Electronics and Communication Engineering Department, College of Science and Technology, Royal University of Bhutan Author
  • Sangay Thinley Electronics and Communication Engineering Department, College of Science and Technology, Royal University of Bhutan Author
  • Tshering Nidup Electronics and Communication Engineering Department, College of Science and Technology, Royal University of Bhutan Author
  • Jigme Zangpo Electronics and Communication Engineering Department, College of Science and Technology, Royal University of Bhutan Author

Keywords:

Transmitter (Tx), Receiver (Rx), Frequency Modulation(FM), Intermediate Frequency (IF), Demodulator, Local Oscillator(L0), RF amplifier, Receiver Fidelity

Abstract

This paper addresses the design of FM Transmitter, Tx and Receiver, Rx based on frequency modulation operating in the range of 88MHz to 108 MHz which is the radio frequency range. The individual circuit block was designed and simulated. Further it was tested using breadboard before it was soldered on PCB.The proposed FM Tx and Rx were evaluated in free space by placing at the distance of 10 meter after fabrication. The designed Tx send the signals and received by Rx at 10 meter. The additional features added were LCD display of frequency and power circuit for both FM transmitter and receiver.

Downloads

Published

15-06-2021

How to Cite

Dema, U. ., Gurung, S. ., Thinley, S., Nidup, T. ., & Zangpo, J. . (2021). Design of FM Transmitter and Receiver Operating in the Range of 88 MHz To 108 MHz. Zorig Melong | A Technical Journal of Science, Engineering and Technology, 5(1), 56-60. http://103.133.216.217/index.php/zm/article/view/50

Similar Articles

1-10 of 16

You may also start an advanced similarity search for this article.